SHOP BY MODEL

SHOP BY PRODUCT













  Home > Atomizers / Rebuildables >

  Rocket Rebuildable Atomizer 4mL (Kayfun 3.1 Clone)




 
Alternative Views:


Our Price: $29.99
Sale Price: $24.99
Savings: $5.00

Stock Status:In Stock

Availability:: Usually Ships in 24 Hours
Product Code: SE-TOB-ROCK
Qty:

Description
 
Brand new Rocket Atomizer made by Tobeco.

This is a clone of the very popular Kayfun 3.1 atomizer. It functions very similar to the Kayfun and includes an airflow control function. It is made out of chrome plated metal with an aluminum and plastic tank section. The mouthpiece is proprietary so you cannot use a 510 drip tip with this model.

This unit comes with a pre made coil in place, however we recommend you remove it and make your own with better quality silica and wire. You can follow instructions found in Kayfun videos to see how to rebuild it, as it is identical.

Please take care when removing the tank sections, the aluminum edges are SHARP!

Availible in silver chrome color only.

Rocket kit includes:

  • Atomizer unit (with pre made coil)
  • Spare fill screws and post screws
  • Mini screwdriver
  • 1 piece of silica & wire


Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.


Please Note: Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.

Warning: Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.


Average Rating: 5 of 5 | Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
 
My first RBA and it's a good one January 1, 2014
Reviewer: Michael from United States  
First, gotta say Smoke Evolution is AMAZING with shipping.  Everything I've ordered has shipped the exact same day, sometimes much later than I would have thought.  Excellent service.

The Rocket performs great but keep in mind that when cleaning, you really wanna pay attention to the O ring under the top cap.  Mine came out under light faucet pressure while cleaning and I thought it was done for until I could get some replacements.  But the rubber grommet from a Protank 2 coil, flipped upside down and put on the chimney directly, works just fine.  If you don't have a vacuum with this thing, you will get leaking out of the airhole.  After filling, flip it upside down to check-- if no juice comes out the drip tip, you're good.  I don't know if you can beat this RBA for the price.  Great flavor and at 50/50 juice it puts out a great amount of vapor.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Works Great!! December 20, 2013
Reviewer: Tim from Sioux Falls, SD United States  
A great item for the price. Yes it is not the real deal but just as satisfying!! Easy to build the coil. I use 30GA Kanthal with organic cotton for the wick (1.5 to 1.7 ohms). Awesome flavor of any of my juices!! If your on a budget or not this is a great rebuild-able!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Lift off... December 10, 2013
Reviewer: Christopher Smith from Clinton, MD United States  
Vapes almost as well as a real Kayfun.  Build quality is ok..nowhere near as good as the real thing, but it works and works well.  Flavor is good, and vapor production is up there.  Another great transaction with Smoke Evolution.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Kayfun Clone October 24, 2013
Reviewer: Terian Bradley from Lexington, TN United States  
Second purchase!!!!! I have 4 of these LOVE them!!!

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
kayfun clone UPDATED REVIEW October 13, 2013
Reviewer: Terian Bradley from Lexington, TN United States  
From the first thoughts its made cheap. But its a clone other than that it seems like I am going to have to find a happy place with it to get it just the way I want it. But they say that with the real one too. So still to new to give a honest review with helpful info for others I believe. Since I have had this a week or so I LOVE IT!!!! I have placed an order for a few more. Gonna be my all day everyday RBA :) LOVE IT!!!

Was this review helpful to you?

We pride ourselves on our service and selection. All of us here are vaping enthusiasts and keep up with the latest trends and products. We do our best to bring you not only the latest and greatest, but products that actually work. You won't find any "junk" here. Take a look around, and please contact us if you have any questions. Vape on!